Pump for a water feature?

Pump for a water feature, or existing fountain? read this.

A pump for a water feature,  or fountain. be it old or new we can help, it is usually not a problem, provided we are given all the information required. i.e., number of outlets, diameter of outlets, quantity of outlets, required jet height etc

A genuine enquiry is as follows:

This enquiry is very good since with out asking we have been given all the information we need.

The only "problem" is that of water demand, or lack of understanding of it. As the enquirer says, "The spray ring has 22 outlets" each outlet is 5mm in diameter. The "average" domestic pump when used with a komet 3-5T (see above picture) will reach around 150 cm, possibly 250 cm in height, but, as mentioned by the person enquiring, this spray ring has 22 individual 5mm outlets, so a domestic pump will not achieve any where near the required height, it will only be capable of around 10 -15 cm in height on each nozzle, nowhere near the required 200 cm. The only pump we could supply that meets the required water  demand for 22 x  5mm outlets is way over the budget of £299

You may also want to see our wrong pump page

This is a 2m diameter ring we supplied. It has 56 2.5mm outlet nozzles, to achieve a jet height of 2 metres (as shown in the picture) it uses 2 of our big pumps, via 2 inlets Yes, 1 pump could only make all jets 1 metre high.

Another example

Another enquiry we had was for a replacement pump for this dandelion fountain, these do have a very high water demand a replacement pump was considerably more than expected. (several £k) We also supply dandelion fountains, which are on our components website (See the nozzles section)

As far as we can tell, in both the above cases the potential client was offered the fountain for "next to nothing" (We don't blame any one for that.) But please check with us first as to how much a replacement pump will cost as it will probably be more than you think.

We also had any enquiry from some one who wanted a new pump for an existing fountain, The existing pump had given up after 15 months use, it turned out to be a sump pump, sump pumps are not designed to run for long times, we suggested a suitable pump which used less electricity (saves money) is slightly more powerful, he never brought one because as in his opinion "it costs too much"  as far as we know he brought another sump pump. A pump from us would have out lasted his sump pump by YEARS and even though it costs more initially, he would also save on his running costs, and not have to keep buying a new pump every 15 months. No helping some folk.

You may also like to see our which pump page

We can  supply pumps and nozzles which are on our components site

What is water demand? to find out click here

Fountain information index          Pump information index

*